The installation of stretch systems is made at the last stage of fixing (absence of dusty work) 

For an installation of stretch ceiling 3sm of firm surface of a wall or a main ceiling is required. A base for a fixing may be brick, concrete, glaze, plaster, gypsum-board ( strengthened with a structural stock) aluminum, metal, wood. 

In a case of possible fall of a covering of a main ceiling a cleanup is needed.  

A customer provides a free access to the location of installation. 

It is necessary to prepare a residence getting it free from house plants and pets.  

Before installation it is necessary to make separation of electricity network of spotlights of a ceiling. 

Stretch ceilings allow to use usual incandescent lamps, halogen lamps for 12W and luminescent lamps. Their standard fixing at the level of fabric requires a limit of a power to 35W for halogen lamps and 60w for incandescent lamps. 

Except spotlights there can be ventilation bars, hanging inside blocks of split systems of conditioners and fire meters.

A standard square for one installing fabric shouldn’t be more than 60m2.The square of a fabric may be big, it depends on the width of a bay. Big squares may be covered with some fabrics with a help of  their separation. 

Stretch ceilings are supposed to be used inside residences.